User manual

6 Connectable PLC
226 © Copyright Reserved Autonics Co., Ltd.
(2) Switch setting
 Switch setting description
Switch No.
Description
Note
Switch 1
B15 to b8 B7 to b0
CH1 baudrate setting
CH1 transmission
setting
Switch 2 CH1 communication protocol type setting Should be set as 1
Switch 3
B15 to b8 B7 to b0
CH2 baudrate setting
CH2 transmission
setting
Switch 4 CH2 communication protocol type setting Should be set as 1
Switch 5 Station setting
 Transmission setting - CH1(Switch 1), CH2(Switch 3)
Bit
Description
OFF(0)
ON(1)
Note
B0 Operation setting Separate Link CH1 should be set as OFF
B1 Data bit 7 8 Set as 8
B2 Parity bit No Yes Set as yes
B3 Odd/Even parity Odd Even Set as odd
B4 Stop bit 1 2 Set as 1
B5 Checksum code No Yes Set as yes
B6 RUN write Restriction Allowance Set as allowance
B7 Setting change Restriction Allowance Set as allowance