User manual

6 Connectable PLC
224 © Copyright Reserved Autonics Co., Ltd.
6.10.3 Monitorable device in GP/LP
GP/LP is able to monitor PLC device and change the status.
Enter system setting menu of GP/LP and select [Monitoring]-[Device Monitor]-[DEVICE]. Select
to be monitored device and you can change the status.
The following is avilable device list of this menu, and available range is same as ‘6.8.2 Available
device’.
Type Mark Device
Bit
X Input relay
Y Output relay
M Auxiliary relay
SM Special relay
L Latch relay
F Facility error detecting relay
B Link relay
TS Timer contact
CS Counter contact
UB GP/LP inner bit memory
Word
D Data register
SD Special register
W Link register
TN Timer present value
CN Counter present value
UW GP/LP inner word memory