User manual

6 Connectable PLC
222 © Copyright Reserved Autonics Co., Ltd.
(2) RS-232C: Applied cable (6)C3M5P05-D9F0-D9M0
6.10.2 Available device
Device range is different depending on PLC model. Even though same type PLC, there is
difference according to the number of I/O contact point.
UB device is as GP/LP inner bit memory, only in GP/LP it is able to use same as general inner
device of PLC.
It is able to switch into word UW device binding 16 units. However it is related with functional
area and it may cause serious error. Be sure to use only within user area UW30 to UW2047
(when not using recipe, UW30 to UW6047).
For further information of GP/LP inner memory, refer to ‘3.6 System signal’.
Refer to below bit/word available device organization and use the device.
X 00 0
① Device name ② Word address ③ Bit address
Type
① ② ③
Bit
X Bit address(Hexadecimal)
Y Bit address(Hexadecimal)
M Bit address(Decimal)
L Bit address(Decimal)
SM Bit address(Decimal)
B Bit address(Hexadecimal)
F Bit address(Decimal)
TS Bit address(Decimal)
CS Bit address(Decimal)
UB Decimal Hexadecimal
Word
W Word address
TN Word address
CN Word address
D Word address
SD Word address
UW Word address(Decimal) None
UW10 = UB100 to UB10F