User manual

1 Product Overview
© Copyright Reserved Autonics Co., Ltd. 23
1.3.4 Color type
This menu displays connected device to RS232C, RS422 port of GP/LP. You can designate
station and connected port by each channel.
No Function Operation
①
CH1
configuration
Displays connected device and connect port for CH1.
Touch this to select one from downloaded protocol in GP Editor, EDITOR,
PRINTER, BARCODE, UNIVERSAL, or DEFAULT protocol and
designate connect port. (Select between RS232C/RS422 or RS232C-A /
RS232C-B).
Depending on CH1 setting, CH2 may be changed as ‘No Use’.
②
CH2
configuration
Displays connected device and connect port for CH2.
Touch this to select one from downloaded protocol in GP Editor, EDITOR,
PRINTER, BARCODE, UNIVERSAL, or DEFAULT protocol and
designate connect port. (Select between RS232C/RS422 or RS232C-A /
RS232C-B). If CH1 is SLAVE, MONITOR does not appear.
③
GP station
configuration
touch key
Touch this and input key pad for station appears.
Station set range: 0 to 31