User manual

6 Connectable PLC
220 © Copyright Reserved Autonics Co., Ltd.
6.9.3 Monitorable device in GP/LP
GP/LP is able to monitor PLC device and change the status.
Enter system setting menu of GP/LP and select [Monitoring]-[Device Monitor]-[DEVICE]. Select
to be monitored device and you can change the status.
The following is avilable device list of this menu, and available range is same as ‘6.7.2 Available
device’.
Type
Mark
Device
Note
Bit
X Input relay
Y Output relay
M
Inner auxiliary relay, Special
relay
S Status relay
T Timer contact
C Counter contact
UB GP/LP inner bit memory
Word
X Input relay
Y Output relay
M
Inner auxiliary relay, Special
relay
Multiple of 16 (M0, M16, M32, …)
S Status relay Multiple of 16 (S0, S16, S32, …)
T Timer present value
C Counter present value
D16 Data/File/Special register 16bit
D32 Data/File/Special register
32bit type combining designated number of
device and next number of device
UW GP/LP inner word memory