User manual

6 Connectable PLC
© Copyright Reserved Autonics Co., Ltd. 205
Word R1 = Bit R100 to R115 , Word UW10 = UB100 to UB10F
There is difference for mark of bit R, M, K, F, L between general mark and GP/LP mark. General
mark is displayed as R##.##, GP/LP mark is displayed without middle of distinguisher.
For example, R10.10 is displayed as ‘R1010’ in G P / LP.
Be sure that GP/LP does not use distinguisher, it uses virtual distinguisher cutting two digits from
the backward of input bit R, M, K, F, L address.
Bit R1 = R0.01 , Bit M10 = M0.10 , Bit K101 = K1.01
Type Device Mark
Range
Start End
Bit
Input relay X X0 X127F
Output relay Y Y0 Y127F
Inner auxiliary relay R R0 R97F
Special relay R R9000 R910F
Link relay L L0 L127F
Timer contact[10ms] T T0 T199
Timer contact[100ms] T T0 T199
Timer contact[1000ms] T T0 T199
Counter contact[16bit] C C200 C255
GP/LP inner bit memory UB UB0 UB6047F
Word
Input relay WX WX0 WX127
Output relay WY WY0 WY127
Inner auxiliary relay WR WR0 WR97
Link relay WL WL0 WL127
Timer present value[10ms] EV EV0 EV199
Timer present value[100ms] EV EV0 EV199
Timer present value[1000ms] EV EV0 EV199
Timer setting value[10ms] SV SV0 SV199
Timer setting value[100ms] SV SV0 SV199
Timer setting value[1000ms] SV SV0 SV199
Counter present value[16bit] EV EV200 EV255
Counter setting value[16bit] SV SV200 SV255
Data register DT DT0 DT2047
File register FL FL0 FL22524
Special register DT DT9000 DT9255
Link register Ld Ld0 Ld255
GP/LP inner word memory UW UW0 UW6047
※1. Depending on CPU type, that range is fluid.
In case of CPL9215A, the range is W0 to W2047. In case of CPL9216A, the range is W0 to
W4095.