User manual

6 Connectable PLC

6.7.1.2 When using Cnet Unit,

PLC type

Unit model

name

Communication

method

Baudrate (bps)

LS Master-K

MK-80S

G7L-CUEB RS232C

19200

G7L-CUEC RS422

MK-120S

G7L-CUEB RS232C

G7L-CUEC RS422

MK-200S

G6L-CUEB RS232C

G6L-CUEC RS422

MK-300S G4L-CUEA RS232C, RS422

MK-1000S G3L-CUEA RS232C, RS422

In case of K7M-DR10S CPU of MK-80S, Cnet Unit cannot be connetable.

(1) Cnet Unit RS-232C(Applied cable (6)C3M5P05-D9F0-D9M0)

(2) Cnet Unit RS-422(Applied cable (16)C3M5P04-D9M0-T6Y0)

6.7.2 Communication configuration

6.7.2.1 Communication configuration when using embedded Cnet CPU

Communication configuration for using embedded Cnet CPU is set from the dedicated ladder

program (KGL for Window) and communication configuration method is as following.

1st Connect the dedicated ladder program and set PLC as connectable status.

2nd From the workspace window of the ladder program, select [Parameter] and desigante

the items as below.

Item Setting Note

Station User-defined 0 to 31(Current station is only 0)

Stop bit 1 Fixed

Data bit 8 Fixed

Parity None Fixed

Baudrate 19200 Fixed