User manual

1 Product Overview
20 © Copyright Reserved Autonics Co., Ltd.
(1) In case of using only CH1 configured in GP Editor
No Item Operation with touching
①
Displays CH1 protocol
Rotates in order as downloaded protocol in GP Editor
→ EDITOR → PRINTER → BARCODE →
UNIVERSAL → DEFAULT protocol (MK-200S(CPU))
②
Displays CH1 connect port
(Designates automatically as
non-using port in ④)
Each of RS422 / RS232C interface type:
RS422 PORT ↔
RS232C PORT
Two ports of RS232C interface type:
RS232C A PORT ↔
RS232C B PORT
③
Displays CH2 protocol
(as EDITOR for default)
Rotates in order as No Use → EDITOR → PRINTER
→ BARCODE
④
Displays CH2 connect port
(Designates automatically as
non-using port in ②)
Each of RS422 / RS232C interface type:
RS422 PORT ↔
RS232C PORT
Two ports of RS232C interface type:
RS232C A PORT ↔
RS232C B PORT
⑤⑥
Communication configuration
by each channel
Moves communication configuration setting window for
selected connected device. You can designate
baudrate, data bit, parity, stop bit, and flow control for
each channel.
If CH2 is as NoUse, it is not able to communication
configuration.