User manual

1 Product Overview

1.3.3 Mono type

This menu displays connected device to RS232C, RS422 port of GP/LP. You can designate

station and connected port by each channel.

No Function Operation

①

CH1

configuration

line

Displays connected device and connect port for CH1.

Touch this to select one from downloaded protocol in GP Editor, EDITOR,

PRINTER, BARCODE, UNIVERSAL, or DEFAULT protocol (MK-

200S(CPU)) and designate connect port. (Select between RS232C/RS422

or RS232C-A / RS232C-B).

②

CH2

configuration

line

Displays connected device and connect port for CH2.

Touch this to select one from downloaded protocol in GP Editor, EDITOR,

PRINTER, BARCODE, UNIVERSAL, or DEFAULT protocol and designate

connect port. (Select between RS232C/RS422 or RS232C-A / RS232C-

B).

Depending on CH1 designation, CH2 is changed automatically as no use,

and if CH1 is SLAVE, MONITOR does not appear.

③

GP station

configuration

touch key

Touch this and decimal (DEC) input key pad for station appears.

Station set range: 0 to 31

④

CH1 station

configuration

touch key

Touch this and decimal (DEC) input key pad for station appears.

Station set range: 0 to 255

Communication is available only when the station of CH1 is set as

connected device station.