User manual

6 Connectable PLC
160 © Copyright Reserved Autonics Co., Ltd.
6.1.4 Monitorable device in GP/LP
GP/LP is able to monitor PLC device and change the status.
Enter system setting menu of GP/LP and select [Monitoring]-[Device Monitor]-[DEVICE]. Select
to be monitored device and you can change the status.
The following is avilable device list of this menu, and available range is same as ‘6.1.3 Available
device’.
6.1.4.1 MT series
(1) Modbus
Type Mark Device Note
Bit UB GP/LP inner bit memory
Word
MT Data register
UW GP/LP inner word memory
(2) Modbus TYPE A
Type Mark Device Note
Bit
1 Bit device area
UB GP/LP inner bit memory
Word
3 Word device area
UW GP/LP inner word memory
6.1.4.2 MP series
Type Mark Device Note
Bit UB GP/LP inner bit memory
Word
MP16 Data register 16bit
MP32 Data register 32bit
UW GP/LP inner word memory
6.1.4.3 THD-RT(MOD)
(1) Modbus
Type Mark Device Note
Bit UB GP/LP inner bit memory
Word
TH Word device area
UW GP/LP inner word memory
(2) Modbus TYPE A
Type
Mark
Device
Note
Bit UB GP/LP inner bit memory
Word
3 Word device area
UW GP/LP inner word memory