User manual

6 Connectable PLC

150 © Copyright Reserved Autonics Co., Ltd.

PLC type

Communication

method

Default

baudrate(bps)

Autonics

RS485/422 9600

MT(MODBUS)

THD-RT(MODBUS)

TM(MODBUS)

TK(MODBUS)

CT(MODBUS)

DS/DA(MODBUS)

Remote I/O ARM(MODBUS)

It should be set same between baudrate, station of Autonics controllers and the baudrate, station

of GP/LP. Refer to each product’s user manual for communication configuration and station of

each product.

Be sure that Autonics controller has devided read/write device for using device. Especially in the

case of using CH2, refer to ‘3.3 1:N communication’.

6.1.2 Station configuration in GP/LP

1st Enter system setting menu.

Touch left-upper point as default position of system setting menu.

2nd Select [SET ENVIRONMENT]-[PLC SETTING].

3rd Touch CH1 station, station input key pad appears. Enter the same station of the

station which is set from MP(MT, THD, TZ, TM, TK, CT, DS/DA, ARM).

4th Touch ‘ENT’ to save the station and touch ‘Menu’ or ‘Exit’ to exit system setting meun.