User manual

5 Universal (General-purpose communication)
126 © Copyright Reserved Autonics Co., Ltd.
Do not designate GP connect device and link device setting of CH1.
In this communication, GP/LP is as master and host unit is as slave. Therefore it is not able to
communicate between GP/LP and host unit.
5.3.2 GP, LP configuration
5.3.2.1 Mono type
1st Enter system setting menu.
Touch left-upper point as default position of system setting menu.
2nd Select [SET ENVIRONMENT]-[PLC SETTING].
3rd CH1 protocol is set as ‘UNIVERSAL’ ’ and CH1 connection port is set as ‘RS422’ as
default.
4th If it is not configured as ‘UNIVERSAL’ for CH1 protocol, touch protocol display item to
set ‘UNIVERSAL’ as following figure.
Protocol display rotates in order as UNIVERSAL→MK-200S(CPU)→No Use→
PRINTER→BARCODE with touching.
5th Touch protocol display item of CH2 to set ‘MK-200S’ as following figure.