User manual

5 Universal (General-purpose communication)

5.3 Universal 1:1:1 communication

Universal 1:1:1 indicates communication between one host unit, one GP/LP and one PLC which

is connected to GP/LP.

5.3.1 GP Editor configuration

When CH1 group is set as ‘AUTONICS UNIVERSAL’ , CH1 type is set automatically as

‘UNIVERSAL’. At CH2 configuration, designate PLC group and type to be connected to GP/LP.

1st Designate GP/LP and PLC type.

Item Description

①GP/LP Type

Designate GP/LP model type by pull-down menu.

②CH1 Group

Designate PLC group of CH1 by pull-down menu.

In this chapter, it is set as ‘AUTONICS UNIVERSAL’.

③CH1 Type

Designate PLC type of CH1 for ② by pull-down menu.

When ②CH1 Group is set as ‘AUTONICS UNIVERSAL’, it is set

automatically as ‘UNIVERSAL’.

④CH2 Group

Designate PLC group of CH2 by pull-down menu.

⑤CH2 Type

Designate PLC type of CH2 for ④ by pull-down menu.

2nd Draw PLC data to communicate with CH2.

CH2 designates communicating PLC with desiganted data register by link device.

(For more details, refer to ‘GP Editor user manual’.)

3rd Select [Communication]-[Download] of menu and download drawn data to GP/LP.