User manual

5 Universal (General-purpose communication)
© Copyright Reserved Autonics Co., Ltd. 119
5.2.2 GP, LP configuration
5.2.2.1 Mono type
You should desigante CH1 protocol as ‘UNIVERSAL’ and set communication configuration for
CH1 in GP/LP.
1st Enter system setting menu.
Touch left-upper point as default position of system setting menu.
2nd Select [SET ENVIRONMENT]-[PLC SETTING].
3rd CH1 protocol is set as ‘UNIVERSAL’ and CH1 connection port is set as ‘RS422’ as
default.
4th If it is not configured as ‘UNIVERSAL’ for CH1 protocol, touch protocol display item to
set ‘UNIVERSAL’ as following figure.
Protocol display rotates in order as UNIVERSAL→MK-200S(CPU)→No Use→
PRINTER→BARCODE with touching.
5th Synchronize CH1 connect port display item with touching.