User`s manual

4 - 15 4 - 15
MELSEC-A
4 SETUP AND PREPARATION BEFORE OPERATION
(4) Insulation displacement of plug cover
Using pliers or like, push the plug cover into the plug to insulation-displace it.After
insulation displacement, make sure that the plug cover is securely installed in the
plug as shown below.
POINT
• The plug cover and plug latches may not engage at the time of insulation
displacement, raising the cover.
Since the plug cover has not been insulation-displaced sufficiently in this state,
push the cover into the plug until it is installed securely.
4.10 Maintenance and Inspection
There are no special inspection items for the AJ65VBTCU-68ADV/ADI module, but
follow the inspections items describes in the PLC CPU User's Manual so that the
system can always be used in the best condition.