User`s manual

3 - 2 3 - 2
MELSEC-A
3 SPECIFICATION
3.2 Performance Specification
Table 3.2 indicates the performance specifications of the AJ65VBTCU-68ADV/ADI.
Table 3.2 Performance specification
Item AJ65VBTCU-68ADV AJ65VBTCU-68ADI
Protection class IP1XB
Voltage
DC –10 to 0 to +10V
(input resistance 1M
)

Analog
input
Current 
DC 0 to 20mA
(input resistance 250
)
Digital output 16-bit signed binary (-4096 to +4095) 16-bit signed binary (-96 to +4095)
Accuracy
Analog input range
Digital
output
Ambient
temperature
0 to 55°C
Ambient
temperature
25±5°C
Max.
Resolution
-10 to +10V
User range setting 1
(-10 to +10V)
-4000 to +4000 2.5mV
0 to 5V 1.25mV
1 to 5V
AJ65VBTCU-
68ADV
(Voltage)
User range setting 2
(0 to 5V)
0 to 4000
1.0mV
0 to 20mA 5µA
4 to 20mA
AJ65VBTCU-
68ADI
(Current)
User range setting
(0 to 20mA)
0 to 4000
±0.3%
(±12 digit
)
±0.2%
(±8 digit )
4µA
I/O characteristics, maximum
resolution, accuracy (accuracy
relative to maximum value of digital
output value)
: digit indicates digital value.
Maximum conversion speed 1ms/1 channel
Absolute maximum input Voltage ±15 V current ±30mA
Analog input points 8 channels/1module
CC-Link station type Remote device station
Number of occupied stations 3 station (RX/RY: each 32 points, RWr/RWw: each 12 points)
Communication cable Ver. 1.10 compatible CC-Link dedicated cable: FANC-110SBH, FA-CBL200PSBH, CS-110
Dielectric withstand voltage Between power supply/communication system batch and analog input batch: 500VAC, 1 minute
Insulation method
Across communication system terminals and all analog input terminals: Photocoupler isolated
Across power supply system terminals and all analog input terminals: Photocoupler isolated
Across channels: Non-isolated
Noise durability By noise simulator of 500Vp-p noise voltage, 1µs noise width and 25 to 60Hz noise frequency
External wiring system
One-touch connector for communication [Transmission circuit]
(5 pins pressure welding type, the plug for the connector is sold separately)
One-touch connector for power supply and FG [Unit power supply and FG]
(5 pins pressure welding type, the plug for the connector is sold separately)
One-touch connector for analog I/O
(4 pins pressure welding type, the plug for the connector is sold separately)
<Sold separately>
Online connector for communication : A6CON-LJ5P
Online connector for power supply : A6CON-PWJ5P
One-touch connector
for communication
Communication line : Ver. 1.10 compatible CC-Link dedicated cable
0.5mm
2
(AWG#20) [ 2.2 to 3.0], shielded wire 0.5mm
2
(AWG#20)
One-touch connector
for power supply/FG
0.66 to 0.98 mm
2
(AWG#18) [ 2.2 to 3.0]
Wire diameter 0.08 mm
2
or more
Applicable
wire size
One-touch connector
for analog I/O
1.0 to 1.4 (A6CON-P214), 1.4 to 2.0 (A6CON-P220) [Applicable cable size : 0.14 to 0.2 mm
2
]
1.0 to 1.4 (A6CON-P514), 1.4 to 2.0 (A6CON-P520) [Applicable cable size: 0.3 to 0.5 mm
2
]
TH35-7.5Fe, TH35-7.5Al (conforming to JIS C 2812)
Applicable DIN rail
CC-Link connector type metal installation fitting: A6PLT-J65V1
DC24V (DC20.4V to DC26.4V, ripple factor within 5%)
Inrush current : 4.2A, within 1.2ms
External power supply
Current consumption 0.10A
Weight 0.17kg
3