Operating instructions

SQV
Using SuperQuickView TM (cont.)
adding channels directly to the list with the remc,te
control's SQV button
O Use the CHANNEL buttons or number buttons to tune the TV
to the channel you want to add to the list.
O Press and hold the SQV button for about 2 seconds. The letters
"SQV" will appear under the channel number, indicating that
the channel has been added to SuperQuickView memory.
_>Important: Once you've added a channel to the SQV memory, the letters "SQV"
appear under the channel number any time the channel number is
displayed, even if you tune to the channel using another method.
E>Important:
If the "SQV" indicator begins to flash when you try to add a
channel to the list using the SQV button, then the SuperQuickView
memory is full. In this case, you will have to remove an existing
channel to add a new channel.
removing channels from the SQV list: using the menu
Use steps 0 - _ from "customizing the SuperQuickView list with
the menus" on the preceding page to select and cancel the channel
from the SuperQuickView list.
removing the channels from the SQV list with the remote
control's CANCEL button
O Press the SQV button repeatedly to select the channel to be
removed from the list.
O
While the channel number and SQV indicators are still
displayed on the screen, press the CANCEL button. When the
SQV indicator disappears, the channel has been canceled from
the SuperQuickView list. If you wait until the channel and
SQV indicators disappear automatically, then the CANCEL
button will not remove the channel f_om the list.
Using the Advanced Features 85