Operating instructions

Changing channels
_Important:
_Important:
_Important:
Your TV offers you six ways of changing channels once their
numbers have been programmed into channel memory:
• selecting channels one-by-one with the CHANNEL up (A) and
CHANNEL down (V) controls
• directly accessing a channel by pressing the number buttons
• using the QuickView TM option to recall the last channel
• using the special QuickView TM option to switch to a particular
memorized channel
• using the SuperQuickView TM function to alternate between
channels on a user-chosen list
• using the ADJUST (A V) buttons with TV GUIDE Plus+ sarf
screen
To change channels faster, use either of the foil.owing procedures:
]
• Enter three digits for every channel number, _asing zeros where
needed. For example, enter 004 to view channel 4 and 028 to
view channel 28, or
• Press the ENTER button after selecting the, number of the
channel. For example, press 4, then press ENTER (in less than
three seconds) to view channel 4.
If only one or two keys are used to select the channel number, the
onscreen display will appear and remain visible for three seconds if
no more keys are entered. Once the display is no longer visib:[e, t:he
TV will tune to the selected channel.
If you memorized channels using the Indoor/Outdoor Antenna
option, your TV can receive antenna channels 2-13 (VHF) and[ 14-
69 (UHF). If you memorized channels using the Cable option, your
TV can receive cable channels 1-125. If you select a channel
outside of these ranges, your TV will not change channels.
50 Chapter 3: Operating Your TV