Operating instructions

TV + stereo audio system
You may want to hear the sound from your TV and/or VCR tkcough
your home audio system. To do this, complete the necessary
connections shown on previous pages of this chapter, then follow
the procedure on this page.
equipment you will need
To hook up an audio system, you will need [__)]
one set of RCA pin type audio cables.
procedure o
O Connect the audio cables to the AUDIO VARIABLE OUT-
PUT terminals on the back of the TV. Use the red cable to
connect the right (R) channel and the white cable to connect
the left (L) channel.
O Connect the other ends of these cables to the AUX IN
terminals on the back of the audio system.
O Turn off the television's speakers. To do this, press AUDIO
on the remote control until you see the SFEAKER display.
Set the speakers to "Off" by pressing either ADJUST r_ght
(_) or ADJUST left (,). See "Adjusting the Sound" in
Chapter 3.
0 Set the audio system's input to the AUX position.
DImImrta_t: For proper tone and volume balance, turn offtlhe TV speakers when
using an external audio system.
Audio system rear terminals
Red Lead t WlniteL_ad
TV Rear Terminals
mm
@, i]......
L _,oc_ R
® @@,
....
0
.._:.,_;: _,
36 Chapter 2: Connecting Your TV