Operating instructions

TV + VCR + antenna or cable with a cable box
(cont.)
_ procedure
0 Connect the cable system's incoming cable to the IN terminal
on the two-way splitter.
O Connect a coaxial cable to one of the OUT terminals on the
splitter; connect the other end of this cable to the _3qT-B
terminal on the back of the TV.
Connect a second cable to the other OUT terminal on the
splitter; connect the other end of this cable to the IN terminal
on the cable box.
Connect the third coaxial cable to the OUT terminal on the
back of the cable box; connect the other end of this cable to the
ANT-A terminal on the back of the TV.
Connect the fourth coaxial cable from the CABLE LOOP-OUT
terminal on the back of the TV to the ANTENNA IN terminal
on the back of the VCR.
O Connect an RCA pin-type video cable from the VII)EO OUT
terminal on the back of the VCR to the \rIDEO INPUT termi-
nal on the back of the TV.
[:>Important: If you are connecting a Super VHS (S-_%IS) VCR, use an S-Video
cable instead of an RCA pin-type video cable. Connec; this S-Video
cable to the S-VIDEO OUT terminal on the VCR. Connect the
other end of this cable to the S-VIDEO INPUT terminal on the
back of the TV.
O Connect a set of RCA pin-type audio cables to the AUDIO OUT
terminals on the back of the VCR. Use the red cable to connect
the right (R) channel and the white cable to connect the left (L)
channel.
O Connect the other ends of this cable to the AUDIO INPUT
terminals on the back of the TV.
Basic Connections 31