Operating instructions

TV + VCR + antenna or cable without a cable box
(cont.)
>Important:
O Connect the second coaxial cable from the VCI_ ANT-OUT to
TV ANT-B.
O Connect an RCA pin-type video cable to the VIDEO OUT
terminal on the back of the VCR. Connect the other end of this
cable to one of the VIDEO INPUT terminals oil the back of the
television..
If you are connecting a Super VHS (S-VItS) VCR, ase an S-Video
cable instead of an RCA pin-type video cable. Connect this S-Video
cable to the S-VIDEO OUT terminal on the VCR. Connect the
other end of this cable to the S-VIDEO INPUT terminal on the
back of the TV.
O
Connect a set of RCA pin-type audio cables to the AUDIO OUT
terminals on the back of the VCR. Use the red cable to connect
the right (R) channel and the white cable for connecting the left
(L) channel.
Connect the other ends of this cable to the AUDIO INPUT
terminals on the back of the TV.
If you plan to use TV GUIDE Plus+, connect _;he IR emitter
cable to the IR/G LINK. Place one of the emitter ends in front
of the VCR. For more detail concerning the placement of the
emitter lenses, see the TV GUIDE Plus+ OpE.rating Guide.
28 Chapter 2: Connecting Your TV