Operating instructions

TV + cable with a cable box
If 'IV GUIDE Plus+ will be used
Use this hook-up if:
• you will be using TV GUIDE Plus+
•you use a cable box only to descramble premium cable channels
To complete the hook-up, you'll need:
fs
__.IR Transmitters !
ran mi, r rises
IR Emitter Connection /
J
• three lengths of 75 ohm coaxial cable
• one IR emitter (provided with TV)
O Connect the cable system's incoming cable to the IN terminal on
the two-way splitter.
Connect a coaxial cable to one of the OUT terminals on the
splitter; connect the other end of this cable to the ANT-B termi-
nal on the back of the TV.
O
O
O
Connect a second coaxial cable to the other ()UT terminal on the
splitter; connect the other end of this cable to the IN terminal on
the cable box.
Connect the third coaxial cable to the OUT terminal on tlhe back
of the cable box; connect the other end of this cable to the ANT-A
terminal on the back of the TV.
Connect the IR emitter.
Plus+ Operating Guide.
Incoming !
Cable
@
f
J
:xn
Cable Box
Rear Terminal
Follow the procedu:res in the _m¢"GUIDE
TVRear Term nal
iiii
_ _ [_l_ Emitter
24 Chapter 2: Connecting Your TV