Operating instructions

Remote control buttons and functions (cont.)
@ select switch
Your remote control has four layers: the
TV layer, the VCR-A layer, the DVD
layer, and the AUDIO layer. You can set
up each of these layers to operate a
different piece of equipment. Use this
switch to select the layer you want to set
up or use.
@TV GUIDE Plus4- ('IV GUIDE+)
Use this button to dJsplay TV GUIDE
Plus+ program listings.
Important:
TV GUIDE Plus+ must. be activated to
operate this button. See the TV GUIDE
Plus+. Operating Guide.
@power button (POWER)
Press this switch to turn the TV on or off.
@ number buttons (0-9)
Use to select a channel number or to
enter a parental lock code, OR
to enter zip codes for TV GUIDE Plus+
setup.
@ channel control (CHANNEL)
Press the top part of the button to change
to a channel with a higher number; press
the bottom part to change to a channel
with a lower number.
@ SuperQuickView TM button (SQV)
Press to view channels you have
programmed into SuperQuickView _"
memory.
@volume control (VOLUME)
Press the top part of the button to in-
crease the volume. Press the bottom part
of the button to decrease the volume.
Q
input button (INPUT)
Use to select the input source you wish to
watch:
• TV channels on Antenna A or
Antenna B
• Other equipment connected to Input 1,
2 or 3 (on some models).
@QuickView button (QV)
Press this button to instantly switch to
the channel that you designated as the
Quick View channel. Press again to
return to the last channel viewed.
@ mute control (MUTE)
Use to turn the sound off complel:ely or
to restore it to its original volume.
@ enter/exchange button (ENTER/
EXCH)
Use this button after selecting a channel
number, after selecting an item t_om the
onscreen menu system, or with the
picture-in-picture mode.
@ information button (INFO)
Use to view an onscreen summary of the
current settings fi)r the TV or AUDIO
functions and the display related[ to
Extended Data Services (XDS).
This button is also used extensively in
the GUIDE Plus+ menu system. See
the TV GUIDE Plus+ Operating Guide.
@light button
Use to light up the :remote (for four
seconds).
@adjust buttons ( J,, •, _ , _)
After selecting ar_ audio or video func-
tion, use these buttons to adjust the
sound or picture. Also use these with
the picture-in-picture mode to move the
PIP location on the screen and to select
i_ems in the menus.
ADJUST buttons may be used to scroll
through the channds in GUIDE Plus+
menus.
Overview of the Remote Control 17