Operating instructions

Using the remote control (cont.)
If your cable box is
this brand...
Zenith
Hamlin
Jerrold
G.I.
Oak
Pioneer
S.A.
...enter this code
If your cable box is
51
52,53,69
54,57,58,59,60,85,87
55,56
61,62,82
64,65,84
66,86,88,89,91,92
this brand...
Tocom
Panasonic
Macom
Philips
Regency
..enter this code
67,68,72
63,70
71
73,74,75,76,77,
93,94,95,96,97,98:.99
79
_>Important:
_>Important:
_Important:
Sometimes manufacturers will change their prcducts, or they may
use more than one code. If this is the case, your remote may not be
able to operate your VCR or cable box.
Each layer (CABLE, VCR-A or VCR-B) (:an be set for either a cable
box or a VCR.
When you replace the batteries in your remote control, the remote
will return to its initial setting.
<using your remote control to operate your VCR>
After you have set up your remote control for your particular brand
of VCR, you can use the remote to operate your VCR.
Choose the layer using the select button on the remote control:
VCR-A, VCR-B or CABLE.
Point the remote control at the VCR and press the desired
buttons.
If you are using a Mitsubishi VCR, you will be able to use all of the
buttons on the remote control to operate your VCR except for
MUTE, VOLUME and the PIP function buttons.
If you are using another brand of VCR, you can u,_e the POWER,
CHANNEL, REC, STOP, PAUSE, REW, PLAY and FF buttons to
operate your VCR.
44 Chapter 3: Operating Your TV