Operating instructions

Adjusting the color purity (CS-35303, CS-35313 only)
_Important:
Your MITSUBISHI CS-35303, CS-35313 color television has a large
screen picture tube and color purity may be affect,ed slightly by the
earth's magnetic field. For best results, follow the instruction
below for color purity adjustment.
L
I
control panel _ _C_
O Turn off the TV set.
Select the desired location and install the set. Determine the
compass direction where the set is facing. The direction is
determined from the front of the screen facing forward.
Select the position for the DIRECTION switch according to the
chart below.
TV SET DIRECTION
North
North East
North West
South
South East
South West
East
West
DIRECTION SWITCH
S NEUTRAL N
X
X
X
X
X
X
X
STRENGTH SWITCH
x
1
Turn the TV on, and check the color performanze.
If a color impurity is still present, change thc_ STRENGTH
switch to position "2". If a color impurity persists after chang-
ing the STRENGTH switch position, press tbe degauss button
after a few minutes.
The color purity switches must be adjusted each time the set is
moved to a new location.
If a color impurity still persists after the re-adjustment of color
purity switches, contact your MITSUBISHI dealer or
MITSUBISHI Authorized Warranty Service Center.
Getting Started 41