Operating instructions

TV+audio system
equipment you will need
To hook-up an audio system, you will need:
• 1 set of RCA pin-type audio
cables.
Procedure
O Connect one end of RCA pin-type audio cables to the AUDIO
OUTPUT terminals on the back of the television Use the red
cable to connect the right (R) channel and the white cable to
connect the left (L) channel.
Connect the other ends of this cable to the AIEX ]:N terminals on
the back of the audio system.
Turn offthe television's speakers. To do this, press the AUDIO
function button on the remote control until you see the
SPEAKER display. Set the speakers to "Off' by pressing the
ADJUST button. (See "Adjusting the sound," page 61.)
Set the audio system's input to the AUX positi,_n.
Dj-- White Lead
L Red Lead
Audio System Rear Terminals
Aux
0
C_=_ ----_ (_ R
0
-- Red Lead
\
VHF/UHF
(75_)
@
TV rear terminals
Basic Connections 37