Operating instructions

TV+ separate UHF and VHF antennas
equipment you will need
If UHF and VHF signals are brought into your home with two
separate antennas, you'll need to combine the anten:aas into a single
wire to connect them to the TV. To do this you will need a UHF/
VHF combiner. (There are different combiners for different kinds
of leads. Check with your local electronics store far the kind of
combiner you need.)
Pictured below is a standard combiner.
To connect separate UHF and VHF antennas to your television:
O Connect the antenna leads to the UHF/VHF combiner.
Press the combiner onto the antenna terminal o:a the television.
\\ _\l
\\lku
VHF Antenna
(Channels 2-13)
n///
I
--_ 300 _ Flat Twin Lead
External
Antenna
orCable
300 Ohm to
75OhmCombiner
Back Side
UHF Antenna
(Channels 14-69)
'''''''_l i
3000. Flat -
Twin Lead
TV rear terminals
30 Chapter 2: Connecting Your TV