Operating instructions

TV+antenna or cable without a decoder box
equipment you will need
If you have a standard 75-ohm coaxial cable, you will not need
additional equipment. If your antenna has two leads (called flat
twin leads), you'll need:
1 75-300 ohm transformer.
75 Ohm
Coaxial Cable
-- -- 300 Ohm Flat
Twin Lead
0
0 0 _
/
Optional 300 Ohm to 75 Ohm
Matching Transformer
TV rear terminals
VHF/UHF
175£_)
connecting a cable
O Push or screw the end of the cable onto the antenna terminal on
the television.
connecting an antenna with flat twin leads
O Use a screwdriver to connect the leads to the transformer.
O Push or screw the transformer onto the antenna terminal on the
television.
28 Chapter 2: Connecting Your TV