Operating instructions

C) select buttons
Use these buttons to select the component you wish to operate:
the TV, an audio component (in CABLE layer), VCR-A or VCR-
B. These are also used to set up your remote control for your
particular brand of VCR.
C)VCR buttons
These buttons can be used to control VCRs. These are pre-
programmed to operate select Mitsubishi components.
(_power button (POWER)
Use to turn the TV on or off.
_mute control (MUTE)
Use to turn the sound off completely or restore it to its original
volume.
(_ super quick view button (SQV)
Press to view channels you have programmed ir.to the super
quick view memory.
(_) quick view button (QV)
Press to switch to the channel you have stored into the quick
view memory.
(_volume control (VOLUME)
Press the top part of the button to turn up the volume; press the
bottom part of the button to turn down the volume.
(_)input button (INPUT)
Use to select the input source you wish to watch:
• TV, or
• External.
(_) channel control (CHANNEL)
Press the top part of the button to change to a channel with a
higher number; press the bottom part to change to a channel
with a lower number.
(_ enter button (ENTER)
May be used after selecting a channel number or an item from
the on-screen menu system. Also use with the PIP function.
(_ audio and video controls
These buttons are used in pairs to adjust features of the image
or sound (other than volume) with a two-step process: using
one of the audio or video buttons to select a fimction, and then
using the adjust up/down button or right/left button.
audio function button (AUDIO)---Use to s elect one of the.
following audio functions:
-stereo/SAP/mono,
-bass,
-treble,
Overview of the Remote Control 21