Operating instructions

Selecting the PIP source
_00 .J,
0
Turn your VCR on and select a
channel on the VCR that is
different than the channel you
see on your TV screen.
O
Press the source button
(SOURCE) on the remote
control repeatedly to select the
source of the PIP image: TV or
Input.
O The PIP image will change as
follows.
---÷ TV _ Input
Important:
'b>Important:
_Important:
To change the input of the background (main) image while a PIP
image is on the screen, press the input button (INPUT) on the
control panel or on the remote control.
Changing channels while using the PIP modes
You can use the buttons on the
remote control to change the
channels of both the main image
and the small PIP image, as if
your TV had two-tuners.
To do this:
0 Point the remote at the VCR
and press the VCR channel
button (VCR-CH) on tlhe remote
control to change the channel of
the PIP image.
O Press the CHANNEL button on
the remote control, to change
the channel of the main image.
When the source of both the main image and the PIP image is the
TV, the VCR channel (VC:R-CH) button will not change the chan-
nels of the main image or the PIP image.
You must have set up the "VCR-A" laver of your remote for this
button to work correctly. (See pages 37-40.)
74 Chapter 4: Using the Special Features