Operating instructions
®
®
®
®
Q
®
(9
select buttons
Use these buttons to select the component you wish to operate:
the TV, a cable decoder box, or a VCR. These buttons are also
used to set up your remote control for your particular brand of
cable box or VCR.
VCR buttons
These buttons can be used to control VCRs. The remote control
is pre-set to operate Mitsubishi VCRs, and it can be pro-
grammed to operate VCRs from other manufacturers. (The CS-
31205 remote control does not have index buttons.)
power button (POWER)
Use this button to turn the TV on or off. When you turn the TV
on, the power indicator lights in green
mute control (MUTE)
Use this button to turn the sound off completely or to restore it
to its original volume.
super quick view button (SQV)
Press this button to view the channels that you have pro-
grammed into super quick view memory. (See page 45.)
quick view button (QV)
Press this button to instantly switch to the channel that you
memorized as the quick view channel. (See page 45.)
volume control (VOLUME)
Press the top part of the button to turn up the volume; press
the bottom part of the button to turn down the volume.
input button (INPUT)
Use this button to select the input source you wish to view:
• TV, or
• Input.
channel control (CHANNEL)
Press the top part of this button to change to a channel with a
higher number; press the bottom part to change to a channel
with a lower number.
enter and exchange button (ENTERiEXCH)
Use this button after selecting a chanael number or after
selecting an item from the on-screen menu system. You will
also use this button with the PIP modes (CS-31305, CS-31309,
and CK-31304 only).
Overview of the Remote Control 17