Operating instructions

selecting the source of the PIP image
_Important:
The Mitsubishi TV you have purchased has two-tuner PIP. lfyeu
have only an ANT-A input connected, you can view one program on
the main picture and another channel from the same ANT input on
the PIP display without the use of a second external tuner, such as
a VCR.
If you have a cable box on ANT-A, you will not be able to ha_e both
the PIP and main pictures from ANT-A. The main picture must be
ANT-B and the PIP picture ANT-A (cable box).
J:_ U
QQQ_
.9 ® U
v 9
"_ <f2b ©
._ W_r$tE_dt_
L_b
0
0
Turn the PIP image on by
pressing the PIP button.
To select the PIP input, press
the PIP INPUT button. Eacih
time you press the button, the
PIP input will select the next
input from the inputs aw_ilable:
• ANT-A, INPUT 1, IN]?UT 2
or INPUT 3,
You can select ANT-B in
PIP, only when the main
input is from INPUT 1,
INPUT 2 or INPUT 3.
Ant A 023
ESPN
PIP A023
Each time you select a dffferent
input, an on-screen display will
appear for about five seconds.
The screen will display the
name of the input selected.
You can also select the F'IP
input source by first selecting
the source in the main picture
and then pressing the ENTER!
EXCH button. Pressing this
button with the PIP displayed
exchanges the PIP picture for
the main picture.
DImportant: If you have a picture displayed from ANT-B on the main picture,
and the PIP source from ANT-A, the ENTER/EXCH button will not
exchange the main picture for the PIP picture.
Using the Picture-in-Picture (PIP) Modes 93