Operating instructions

_>Important:
[_Important:
Setting the timer
This special feature allows you to program the TV to turn on
automatically at a specific time to the channel tl:_at you set.
The clock must be set prior to setting the timer.
_-']TV Main Menu
[] First Time Setup I
[] Customize Display
I
[] Advanced Features
[] Select NV Memory
[]Guide Plus+ Menu
_----']ADJUST to select
ENTER to enter
MENU to exit menus
[] Advanced Features
[] Set the Timer
[] Use Parental Lock
[] Use SuperQuickViewTM
] ADJUST to select
ENTER to enter
MENU to go back
To set the timer:
O Press the MF,NU button on the
remote control. The Main
Menu will appear on the screen.
O Use the ADJUST buttons to
select "Adval:Lced Features".
Press ENTEtUEXCH.
You will see t,he "Advanced
Features" screen. Use the
ADJUST but_ons to select
"Set the Timer". Press
ENTER/EXC H.
Important:
If you have not set the time, you
will be automatically routed to
the "Set the clock" menu.
[] Set the Timer
[] Day : Sunday
[] Start time : - - : ....
]Antenna :--
[] Channel : --
] DJUST to select
ENTER to enter
J_ MENU to go back
O Use the ADJUST buttons and
the ENTER button to set Day
(Mon-to-Fri, Everyday, Sun -
Sat), Start ti:me, Antenna, and
Channel.
After setting the timer, the
Program Timer indicator will
blink in gree3:Lwhile the TV is
turned off.
If you press the CANCEL button while setting the timer, the arrow
will move to the previous item. To clear the timer, press CANCEL
when "Day" is selected.
When the timer turns the TV on, the display will flash. If you do
not press any remote control button within 5 minutes after the TV
turns on, the TV will automatically turn off. Pre_,_s a function
button (such as the INFO button) to keep the TV on and to stop the
flashing display.
Using the Advanced Features 79