Operating instructions

TV + stereo audio system
You may want to hear the sound from your TV and/or VCR through
your home audio system. To do this, complete the necessary
connections shown on previous pages of this chapter, then follow
the procedure on this page.
equipment you will need
To hook up an audio system, you will need
one set of RCA pin type audio cables.
procedure
O Connect the audio cables to the AUDIO VARIABLE OUT-
PUT terminals on the back of the _f_. Use the red cable to
connect the right (R) channel and t:he white cable to connect
the left (L) channel.
O Connect the other ends of these cables to the AUX IN
terminals on the back of the audio system.
Turn off the television's speaker_. To do this, press AUDIO
on the remote control until you see the SPEAKER display.
Set the speakers to "Off' by pressing either ADJUST right
(_) or ADJUST left (<). See "Adjusting the Sound _ in
Chapter 3.
Set the audio system's input to the ALPX position.
DImportant: For proper tone and volume balance, turn off the TV speakers when
using an external audio system.
Audio system rear terminals
Au_,o
_
.......
"IV Rear Terminals
_--..._.__ VAR[ASLE
WhileLe_Ld 0 RedLead
36 Chapter 2: Connecting Your TV