Operating instructions

TV + VCR + antenna or cable without a cable box
You may want to connect a VCR along with your antenna or cable.
If so, based on whether or not you will be using TV GUIDE Plus+,
follow the directions which apply.
To complete the hook-up, you'll need:
Three lengths of
75 ohm coaxial cable
I
• One set of RCA pin-type audio cables
• One RCA pin-type video cable
(if connecting a standard VC:R), Or
• One S-Video cable
(if connecting an S-VHS VCR)
•
One IR emitter assembly
(ifTV GUIDE Plus+ will be used)
Important:
If your VCR and/or cable box can only be tuned with a cha_nel up!
channel down control, TV GUIDE Plus+ will[ not function. Only
VCRs and cable boxes which can be tuned with a numeric keypad
are compatible.
procedure
O Connect the incoming cable to the ANT-A terminal on back of
the TV.
O Connect one end of a coaxial cable to the (',ABLE LOOP-OUT
terminal on the back of the TV.
O Connect the other end of the coaxial cable to the ANTENNA IN
terminal on the VCR.
Basic Connections 27