Operating instructions

TV + separate UHF and VHF antennas
equipment you will need
If UHF and VHF signals are brought into your home with two
separate antennas you'll need to combine them in order to connect
them to the TV. To do this you will need a UHF/VHF combiner.
(There are different combiners for different kinds of wires. Check
with your local electronics store for the kind of combiner you need.)
Pictured to the right is a
standard combiner with the
following specifications:
Two (2) 300 ohm input.,;
One (1) 75 ohm output
75 OHM Out
To connect separate UHF and VHF antennas to your _FV:
O Connect the UHF and VHF antenna leads to the appropriate
terminals on the UHF/VHF combiner.
O Press the combiner onto the ANT-A terminal on the rear of the
TV.
VHF Antenna
(Channels 2-13)
-- Flat Twin Lead
External
Anlenna
or Cable
UHF Antenna
(Channels 14-69)
_--
Flat Twin Lead -
300 Ohm to
75 Ohm
O Combiner O
Back Side
"IV Rear Terminal
26 Chapter 2: Connecting Your TV