Operating instructions

TV + cable with a cable box
If TV GUIDE Plus+ will be used
Use this hook-up if:
• you will be using TV GUIDE Plus+
• you use a cable box only to descramble premium cable channels
To complete the hook-up, you'll need:
r ns r rises
IF] Emitter Connoction
• three lengths of '75 ohm coaxial cable
• one IR emitter (provided with TV)
O Connect the cable system's incoming cable to the IN terminal on
the two-way splitter.
O Connect a coaxial cable to one of the OUT terminals on the
splitter; connect the other end of this cable to the A_T-B termi-
hal on the back of the TV.
O Connect a second coaxial cable to the other OUT terminal on the
splitter; connect the other end of this cable to the IN terminal on
the cable box.
O Connect the third coaxial cable to the OUT terminal on the back
of the cable box; connect the other end of this cable to the ANT-A
terminal on the back of the TV.
O Connect the IR emitter. Follow the procedures in the TV GUIDE
Plus+ Operating Guide.
Incoming
Cable
0
i_ our
Cable Box
Rear Terminal
(
i
TV Re_-LrTerminal
mira
24 Chapter 2: Connecting Your TV