Operating instructions

TV + antenna or cable without a cable box
equipment you will need
If you have a standard 75-ohm coaxial cable, you will not need
additional equipment. If your antenna has two leads (called twin
lead or 300 ohm antenna lead), you will need:
• One 300-75 ohm matching
transformer
connecting a cable
300 ohm - in
75 ohm - out
• Connect the incoming cable or antenna to the ANT-A input
terminal on the TV.
300 Ohm Flat
Twin Lead ---{
75 Ohm
>-- Coaxial Cable
O
O O
/
Optional 300 Ohm to 75 Ohm
Matching Transformer
TV rear terminals
connecting an antenna with twin leads
O Use a screwdriver to connect the 300 ohm twin leads tA)the
transformer.
O Push the 75 ohm side of the transformer onto the ANT-A
terminal on the TV.
Basic Connections 23