Operating instructions

Troubleshooting (cont.)
Problems
Possible Solutions
For More Information
The remote control doesn't
work.
• Check that the batteries are
fresh and installed correctly.
See "Getting ready to use
the remote control" in
Chapter I for an explanation
of how to install batteries in
the remote control.
Check that the select switch
is set to "TV."
Sec_"Remote control buttons
and fanctions" in Chapter 1,
which explains where the
select switch is located.
Be sure that you are
pointing the tip of the remote
control toward the TV from a
distance of no more than 20
feet.
See "Getting ready to use
the remote control" in
Chapter 1, which contains
pointers for using the remote
control.
• You can't access a channel
or adjust the volume.
If a menu or video adjust-
ment display is showing,
press MENU or wait to
return to normal TV viewing.
The CHANNEL i"v and
VOLUME/xv fu.nctions are
no1; available while the menu
or video adjustment displays
are showing.
You can't see a different
channel in the reduced PIP
image. (CS-27309 only)
Use the PIP INPUT button
to change the source of the
PIP image.
Make sure you have a second
source, such as a VCR,
turned on and connected to
your TV.
• See ":Using the Picture-in-
Picture (PIP) modes" in
Chapter 3.
You cannot see a picture
when you play a tape iriithe
VCR.
If you connected your VCR
with A/V cables, use the
INPUT button to select the
input source that the VCR is
connected to.
• See "Selecting the input
source" for an explanation
about changing the input.
70 Chapter 4: Troubleshooting