Operating instructions

Using SuperQuickView TM (cont.)
SUPERQUICKVIEW
<A>
120
12
104
4
B C D
O Press ADi'TJST • or VOLUME.
The screen will show the
SuperQuickView menu.
O Use ADJUST • • and • <
to select the memory column
and channel position of' the
channel you wish to remove.
O Use the number buttons to
enter "0 0", this will remove the
selected channel from the
SuperQuickView memory.
Press MENU to return to
normal 'l%rviewing.
Using One-Key Play
One-Key Play is a special feature that makes !it easier to use your
television with a Mitsubishi VC,R. When yoa press the PI_z\Y
button on the remote control, the TV will automatically switch to
the input or channel you use to watch the playback of a video tape.
before you begin
You must have a Mitsubishi VCR. If this VCR has VCR A and
VCR B remote control codes, the VCR must be set to VCR A. See
your VCR's owner's guide for instructions on setting the VCR to
VCR A.
If you have not reprogrammed the remote control and the remote is
able to operate your VCR, then your VCR is already set to VCR A.
The remote control that came with the TV was programmed at the
factory to operate Mitsubishi VCRs set to VCR A remote codes.
You need to know which Input (INPUT1 or INPUT2) or channel
(3 or 4) you use to watch a video tape.
Using the Advanced Features 61 •