Operating instructions

Using the remote control to operalLe VCRs, cable

boxes and other equipment

about your remote control

This TV's remote control has fi)ur "layers": the TV layer, the VCR

layer, the DVD layer, and the AUDIO layer. Each layer can be

used to operate a different component in your AN system. You.

choose the layer you want to use by setting the "select" switch

across the top of the remote control.

When you first receive your remote control, _;he TV layer is set up

to operate your Mitsubishi TV and VCR. The VCR layer is set to

operate your Mitsubishi VCR. The DVD layer is programmed to

operate your Mitsubishi DVD player. The AUDIO layer is pro-

grammed for your Mitsubishi AFV receiver.

You can use the following to operate your TV:

• power button • SuperQuickView TM buttons

• channel control (A, B, C, and D buttons)

• volume control • input button

• mute button • display bul;tcn

• number buttons • playbutton

• menubutton o' adjust buttons

• QuickView TM button • PIP controls (CS-27309 only)

If you have a cable box (including a digital satellite box), a non-

Mitsubishi VCR, a Mitsubishi laserdisc player, a Mitsubishi A/V

receiver, or a compact disc player, you can set up the layers in the

remote control to operate these components.

The VCR'layer can be set up to operate a non-Mitsubishi VCR. The

DVD layer can be set up to operate a VCR, cable box, digital[

satellite box, or a Mitsubishi laserdisc player. The AUDIO layer

can be set up to operate a cable box, a digital satellite box, a

Mitsubishi laserdisc player, or a Mitsubishi _[ receiver. The TV

layer can be set up to operate the volume control of a Mitsubishi

A/V receiver.

setting up the remote control to operate your VCR

Turn offyour VCR.

Set the select switch on the remote to choose the layer you

want to set up: VCR or DVD.

_While holding in the POWER button on the: remote control,

enter the code number listed in the chart on the next page for

your brand of VCR. Be sure to enter both digits of the code

number. If more than one number is listed, begin with the iirst

code listed.

Getting Started 35