Operating instructions

TV+VCR+antenna or cable without a cable box
(cont.)
procedure
O Connect the incoming cable or antenna t(_ the ANTENNA IN
terminal on the VCR.
Connect one end of a coaxial cable to the ,_qTENNA OUT
terminal on the VCR.
Connect the other end of the comxial cable to the antenna termi-
nal on the TV.
0 Connect an RCA pin-type video cable to tSe VIDEO OUT termi-
nal on the back of the VCR. Connect the other end of tlhis cable
to the VIDEO INPUT terminal on the back of the TV.
DImportant: (CS-27309 only) If you are co:nnecting a Super VHS VCR, use an
S-video cable instead of an RCA pin-type video cable. Connect one
end of the S-video cable to the S-Video OUT terminal on the VCR.
Connect the other end of the ('.able to the S-Video IN terminal on
the TV.
Connect a set of RCA pin-type audio cables to the AUDIO OUT
terminals on the back of the VCR. Use the red cable to connect
the right (R) channel and the white cable for connecting tile left
(L) channel.
O Connect the other ends of this cable to 1;he AUDIO INPUT
terminals on the back of the television.
_>Important: If your VCR is monaural (non-stereo), you w:ll only connect a single
RCA pin-type audio cable. Connect the cable to the VCR, then
connect the other end to the L (LEFT) audio input on the back of
the television.
Important: If your VCR has a video channel switch, set it to "OFF/AV." See
your VCR's owner's guide for details.
Begin playing a tape on the VCR.
O To view the VCR, select the external input source by using the
INPUT button on the front control or on the remote control.
26 Chapter 2: Connecting Your TV