Operating instructions

TV+ separate UHF and VHF antennas
equipment you will need
If UHF and VHF signals are brought into your home wil;h two
separate antennas, you'll need to combine the antennas before
connecting them to the TV. To do this you will need a UHF/VtIF
combiner. (There are different combiners fcr different kinds of
leads. Check with your local electronics sto:re for the kind of' com-
biner you need.)
Pictured below is a standard combiner.
)
)
_J
To connect separate UHF and VHF antennas to your tel,evision:
O Connect the UHF and VHF antenna leads to the appropriate
terminals on the UHF/VHF combiner.
O Press the combiner onto tlhe antenna terminal on the television.
VHF Antenna
(Channels 2-13)
-- 300 _ Flat Twin Lead
UHF Antenna
(Channels 14-69)
300_ Flat -
Twin Lead
_7 "fV rearterminals
300 Ohm to _ _
5 Ohm Combiner _ ANT/ VIDEO AUDIO
;F_t s-v,oEO
Back ,_i,3e L_@
24 Chapter 2: Connecting Your TV