Operating instructions

Remote control buttons and functions (cont.)

This section provides you with an overview of the remote control's

buttons and the features that they control.

This section does not provide detailed explanations on the use of

these buttons. To determine which buttons ace used with a particu-

lar feature, refer to the instructions for that feature.

The instructions for individual features are found in Chapter 3,

"Operating Your TV."

select switch

Your remote control has four control layers: the TV layer, the

VCR layer, the DVD layer, and the AUE,IO layer. You can set

up each of these layers to ,operate a different piece of equipment.

Use this switch to select the layer you want to set up or use.

power button (POWER)

Use to turn the TV on or off. (The select switch must be set to

the TV layer.)

® number buttons (0-9)

Use to select a channel number.

channel control (CHANNEL)

Press the top part of the button to change to a channel with a

higher number; press the bottom part to change to a channel

with a lower number.

volume control (VOLUME)

Press the top part of the button to turn up the volume; press the

bottom part to turn down the volume.

100 button (100)

Use with number buttons when selecting cable channels 100 or

greater.

QuickView TM button (QV)

Use this button to recall the last channel viewed. See "Chang-

ing channels" in Chapter 31.

input button (INPUT)

Use to select the input source you wish tc, watch; TV c:hannels,

or the component connected to Input 1 (rear) or Input 2 (fi:ont).

mute control (MUTE)

Use to turn off the sound completely and to restore it to oI_ginal

volume.

16 Chapter 1: Getting to Know Your TV