Specifications
Table Of Contents
- Title
- Safety Information
- Symbols used in the manual
- Table of Contents
- 1 Introduction
- 2 Profibus DP
- 3 CC-Link
- 4 Ethernet
- A Appendix
- Index
Configuration Example for MELSEC System Q CC-Link
Quick Start Guide for the MELSEC STlite Series 3 - 23
Remote register RWr
For the process images of the individual STlite modules please refer to the appendix, section A.1. For
example, reading a value of 16384 (4000
H
) from D1000 means that a voltage of 5.00 V is applied to
channel 1 of the STL-AD2-V.
Remote register RWw
If you want to output 10 V on channel 1 of the STL-DA4-V1, write 32760 (7FF8
H
) to D2000.
Abb. 3-23: Remote registers RWr
Abb. 3-24: Remote registers RWw
Input data from STL-AD2-V, channel 1
Input data from STL-AD2-V, channel 2
Output data to STL-DA4-V1, channel 1
Output data to STL-DA4-V1, channel 2
Output data to STL-DA4-V1, channel 3
Output data to STL-DA4-V1, channel 4