Specifications
Table Of Contents
- Title
- Safety Information
- Symbols used in the manual
- Table of Contents
- 1 Introduction
- 2 Profibus DP
- 3 CC-Link
- 4 Ethernet
- A Appendix
- Index
Configuration Example for MELSEC System Q Profibus DP
Quick Start Guide for the MELSEC STlite Series 2 - 19
Optimising the configuration
The input and output data of the analog modules can be shifted by adding one additional digital
module for each data direction.
But you don‘t have to buy two modules just to simplify the programming – these two modules are
only virtual!
Insert a digital input module with 8 inputs on slot 2 and another digital output module on slot 4.
When a module is added to the configuration, the module parameters can be set. Select "... not
plugged" for both modules.
Fig. 2-14: New configuration with two dummy modules
Fig. 2-15: The new digital input module on slot 2 is "physically not plugged".
Fig. 2-16: The additional digital output module on slot 4 is also "not plugged".
New module
New module