Specifications

II Parameters
Auxiliary Axis Parameters
II - 233
【#50209】 PSW5 dog1 PSW5 area setting 1
Set "PSW5 area setting" 1 and 2 to specify the area where the position switch 5 will turn ON
when the machine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the
position switch operation. For rotary axes, the output turns ON in the area excluding 0.000
degree.
Default value: 0.000
---Setting range---
-99999.999 to 99999.999 (° or mm)
【#50210】 PSW5 dog2 PSW5 area setting 2
Set "PSW5 area setting" 1 and 2 to specify the area where the position switch 5 will turn ON
when the machine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the
position switch operation. For rotary axes, the output turns ON in the area excluding 0.000
degree.
Default value: 0.000
---Setting range---
-99999.999 to 99999.999 (° or mm)
【#50211】 PSW6 dog1 PSW6 area setting 1
Set "PSW6 area setting" 1 and 2 to specify the area where the position switch 6 will turn ON
when the machine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the
position switch operation. For rotary axes, the output turns ON in the area excluding 0.000
degree.
Default value: 0.000
---Setting range---
-99999.999 to 99999.999 (° or mm)
【#50212】 PSW6 dog2 PSW6 area setting 2
Set "PSW6 area setting" 1 and 2 to specify the area where the position switch 6 will turn ON
when the machine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the
position switch operation. For rotary axes, the output turns ON in the area excluding 0.000
degree.
Default value: 0.000
---Setting range---
-99999.999 to 99999.999 (° or mm)
【#50213】 PSW7 dog1 PSW7 area setting 1
Set "PSW7 area setting" 1 and 2 to specify the area where the position switch 7 will turn ON
when the machine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the
position switch operation. For rotary axes, the output turns ON in the area excluding 0.000
degree.
Default value: 0.000
---Setting range---
-99999.999 to 99999.999 (° or mm)
【#50214】 PSW7 dog2 PSW7 area setting 2
Set "PSW7 area setting" 1 and 2 to specify the area where the position switch 7 will turn ON
when the machine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the
position switch operation. For rotary axes, the output turns ON in the area excluding 0.000
degree.
Default value: 0.000
---Setting range---
-99999.999 to 99999.999 (° or mm)
【#50215】 PSW8 dog1 PSW8 area setting 1
Set "PSW8 area setting" 1 and 2 to specify the area where the position switch 8 will turn ON
when the machine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the
position switch operation. For rotary axes, the output turns ON in the area excluding 0.000
degree.
Default value: 0.000
---Setting range---
-99999.999 to 99999.999 (° or mm)
【#50216】 PSW8 dog2 PSW8 area setting 2
Set "PSW8 area setting" 1 and 2 to specify the area where the position switch 8 will turn ON
when the machine is positioned.
Whether the value of setting 1 is larger than setting 2 (or vice versa) does not affect the
position switch operation. For rotary axes, the output turns ON in the area excluding 0.000
degree.
Default value: 0.000
---Setting range---
-99999.999 to 99999.999 (° or mm)
【#50220】 push.1 Stopper amount
Set the command stroke of the stopper operation in the stopper positioning.
Default value: 0.000
---Setting range---
0.000 to 359.999 (° or mm)