Specifications

II Parameters
Macro List
II - 206
【#7063】 M[07] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7071】 M[08] Code
Set the M code used for calling out the macro with the M command.
Select codes to be entered other than the codes basically required by the machine and M
codes of M0, M1, M2, M30, M96 through M99, and M198.
This is valid when "#1195 Mmac" is set to "1".
---Setting range---
0 to 9999
【#7072】 M[08] Type
Set the macro call out type.
0: Equivalent to M98 P △△△△ ;
1: Equivalent to G65 P △△△△ ;
2: Equivalent to G66 P △△△△ ;
3: Equivalent to G66.1 P △△△△ ;
Others: Equivalent to M98 P △△△△ ;
【#7073】 M[08] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7081】 M[09] Code
Set the M code used for calling out the macro with the M command.
Select codes to be entered other than the codes basically required by the machine and M
codes of M0, M1, M2, M30, M96 through M99, and M198.
This is valid when "#1195 Mmac" is set to "1".
---Setting range---
0 to 9999
【#7082】 M[09] Type
Set the macro call out type.
0: Equivalent to M98 P △△△△ ;
1: Equivalent to G65 P △△△△ ;
2: Equivalent to G66 P △△△△ ;
3: Equivalent to G66.1 P △△△△ ;
Others: Equivalent to M98 P △△△△ ;
【#7083】 M[09] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7091】 M[10] Code
Set the M code used for calling out the macro with the M command.
Select codes to be entered other than the codes basically required by the machine and M
codes of M0, M1, M2, M30, M96 through M99, and M198.
This is valid when "#1195 Mmac" is set to "1".
---Setting range---
0 to 9999
【#7092】 M[10] Type
Set the macro call out type.
0: Equivalent to M98 P △△△△ ;
1: Equivalent to G65 P △△△△ ;
2: Equivalent to G66 P △△△△ ;
3: Equivalent to G66.1 P △△△△ ;
Others: Equivalent to M98 P △△△△ ;
【#7093】 M[10] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)