Specifications

II Parameters
Macro List
II - 204
9. Macro List
(Note) This parameter description is common for M700V/M70V/E70 Series.
It is written on the assumption that all option functions are added.
Confirm with the specifications issued by the machine tool builder before starting use.
【#7001】 M[01] Code
Set the M code used for calling out the macro with the M command.
Select codes to be entered other than the codes basically required by the machine and M
codes of M0, M1, M2, M30, M96 through M99, and M198.
This is valid when "#1195 Mmac" is set to "1".
---Setting range---
0 to 9999
【#7002】 M[01] Type
Set the macro call out type.
0: Equivalent to M98 P △△△△ ;
1: Equivalent to G65 P △△△△ ;
2: Equivalent to G66 P △△△△ ;
3: Equivalent to G66.1 P △△△△ ;
Others: Equivalent to M98 P △△△△ ;
【#7003】 M[01] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7011】 M[02] Code
Set the M code used for calling out the macro with the M command.
Select codes to be entered other than the codes basically required by the machine and M
codes of M0, M1, M2, M30, M96 through M99, and M198.
This is valid when "#1195 Mmac" is set to "1".
---Setting range---
0 to 9999
【#7012】 M[02] Type
Set the macro call out type.
0: Equivalent to M98 P △△△△ ;
1: Equivalent to G65 P △△△△ ;
2: Equivalent to G66 P △△△△ ;
3: Equivalent to G66.1 P △△△△ ;
Others: Equivalent to M98 P △△△△ ;
【#7013】 M[02] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7021】 M[03] Code
Set the M code used for calling out the macro with the M command.
Select codes to be entered other than the codes basically required by the machine and M
codes of M0, M1, M2, M30, M96 through M99, and M198.
This is valid when "#1195 Mmac" is set to "1".
---Setting range---
0 to 9999
【#7022】 M[03] Type
Set the macro call out type.
0: Equivalent to M98 P △△△△ ;
1: Equivalent to G65 P △△△△ ;
2: Equivalent to G66 P △△△△ ;
3: Equivalent to G66.1 P △△△△ ;
Others: Equivalent to M98 P △△△△ ;
【#7023】 M[03] Program No.
Set the No. of the program or file name to be called out. The file name can contain up to 32
characters.
---Setting range---
Program name or file name (up to 32 characters)
【#7031】 M[04] Code
Set the M code used for calling out the macro with the M command.
Select codes to be entered other than the codes basically required by the machine and M
codes of M0, M1, M2, M30, M96 through M99, and M198.
This is valid when "#1195 Mmac" is set to "1".
---Setting range---
0 to 9999