Specifications

II Parameters
PLC Constants
II - 203
【#18151-18900】 R8300,8301 - R9798,9799 PLC constant (Extension area)
Set the value to be set in the data type R register(R8300 to R9799) used in the PLC
program (ladder).
Even if the data is set in the R register that corresponds to the PLC side when this
parameter is displayed, the screen will not change. Enter a different screen once, and then
select this screen again.
#18151 to #18900 is used as the PLC constant extended area.
The area is valid for the number of PLC constant extension points ("#1326 PLC Const Ext.
Num" setting value), starting with #18151.
---Setting range---
-99999999 to 99999999